Environmental test chambers & calibration equipment, made in India
+91 95946 05008info@indeecon.com
Logo
Menu
Contact Us
Industrial GradeISO 9001 Certified

Dual Oven

Indeecon’s dual oven puts two independently controlled heating chambers in a single unit for thermal ageing, drying, heat-resistance testing, curing and thermal conditioning. Each chamber has its own heating system, circulation fan, controller and signal tower, so two processes can run at different temperatures at the same time. Both chambers can run at their maximum rated temperature together. It is built in four temperature ranges, from ambient +5°C to 180°C up to a high-temperature version reaching 300°C.

1-Year Warranty
ISO 9001 Certified
Factory Tested
24/7 Support
Indeecon dual oven with two stacked chambers, each with its own controller and signal tower
Systems Online

1 / 2

Core Engineering Features

Two Independent Chambers

Two oven chambers stacked in one unit, each set and run separately.

A Controller on Each Chamber

Every chamber has its own controller, so each one holds its own temperature.

A Signal Tower on Each Chamber

A signal tower on each chamber shows the status of that chamber.

Four Temperature Ranges

Built from ambient +5°C to 180°C, with standard, extended and high-temperature versions up to 300°C.

Technical Data

Full Specifications

Parameter
Value
Chambers
2, stacked and independently controlled
Temperature control
PLC with touchscreen HMI and PID control
Temperature control accuracy
±1°C per chamber
Programmability
Temperature ramp and soak profiles
Chamber construction
SS 304 stainless steel
Thermal insulation
Rock wool or glass wool
Air circulation
Forced air, independent fan in each chamber
Heating
Independent heating system in each chamber
Simultaneous operation
Both chambers at maximum rated temperature
Signal towers
One per chamber
Base version
Ambient +5°C to 180°C
Standard version
Ambient +10°C to 200°C
Extended version
Ambient +10°C to 250°C
High-temperature version
Ambient +10°C to 300°C
Chamber volume and dimensions
Customised to the application
Shelves
Number, spacing and loading capacity customised
Power supply
Single-phase for smaller configurations, three-phase for larger ones, depending on heater rating

Why Choose a Dual Oven?

Both chambers can be configured to your process and testing requirements, including volume, dimensions, shelf arrangement and temperature range. The options and temperature range are customised to the application and the test standards that apply to it.

Key advantages

  • Independent temperature control: both chambers can run at different temperatures at the same time
  • Space saving: two heating chambers in one consolidated unit
  • Higher throughput: two separate heating or testing processes can run at once
  • Flexibility: different materials, samples or temperature profiles can be run in each chamber

Capabilities

What Makes the Dual Oven Stand Out

  • Two independent chambers: each chamber has its own heating system, circulation fan and temperature control, so the chambers can run different temperatures and profiles at the same time
  • Both chambers at full temperature: both chambers can operate at their maximum rated temperature together
  • Forced-air circulation: forced convection in each chamber, driven by an independent circulation fan
  • PLC control with touchscreen: PLC-based control with a touchscreen HMI and PID temperature control, with ±1°C temperature control accuracy per chamber
  • Programmable profiles: temperature ramp and soak profiles for each chamber
  • SS 304 stainless steel chamber: the inner chamber is made of SS 304 stainless steel, insulated with rock wool or glass wool
  • Over-temperature protection: over-temperature safety protection is fitted
  • Built to your size: chamber volume, external dimensions, shelf number, spacing and loading capacity are customised to the application

INDUSTRIES WE SERVE

Industries That Use the Dual Oven

Automotive

thermal conditioning and heat testing of automotive components

Electrical and Cable

heat-resistance testing of electrical insulation and cable materials

Rubber and Polymers

thermal ageing of rubber, plastic and polymer components

Electronics

heat testing of electronic components and assemblies

Pharmaceutical and Laboratory Equipment

drying and moisture removal from components and materials

Research and Testing Laboratories

material testing, quality control, and research and development

Industrial Manufacturing

curing and heat treatment of compatible materials

Dual Oven – Frequently Asked Questions

Still have questions? Our engineers are happy to help.

Related Products

Nearby models and adjacent systems often evaluated during specification and procurement.

Hot air oven for laboratory drying baking and hot air sterilization applications

Indeecon Product

Hot Air Oven

Lab and industrial hot air ovens 50L–1000L+, 50–500°C. ±2°C uniformity (lab), ±5°C (industrial). J-STD-033, AMS2750, IEC 61010-1. PCB bake-out, powder coating, aerospace heat treatment.

View product
Hot air oven variant for drying and sterilization with uniform hot air circulation

Indeecon Product

Hot Air Oven (Variant)

Lab and industrial hot air ovens 50L–1000L+, 50–500°C. ±2°C uniformity (lab), ±5°C (industrial). J-STD-033, AMS2750, IEC 61010-1. PCB bake-out, powder coating, aerospace heat treatment.

View product
Industrial Vacuum Oven for Semiconductor R&D Degassing and Precision Drying Singapore

Indeecon Product

Vacuum Oven

Precision vacuum ovens 25L–1000L+, to 0.1 mbar — J-STD-033, IPC-A-610. Electropolished SS-316L, N₂/Ar purge, direct shelf heating. MSL 5–6 bake-out and semiconductor wafer degassing.

View product

Custom Configuration

Need a custom build?

Our engineering team can modify dimensions, controllers, and specs to match your exact protocol.